● BM Oilmist Collector Ducted style  

● BV Oilmist Collector Direct Mount style 

● BP Turbo Blower 

● BL Turbo Blower With Flow Regulating Disc

● BS Ring Blower 

● RL/RW 3 LOBES ROOTS BLOWERS

HOW THE OIL MIST IS COLLECTED
1. Pre-separation
The oil mist is sucked away from the tooling area of the machining tool through the 4 inch intake. The primary "stainless pleated cartridge" separates most of the oil mist and provides exceptional gravity drainage. The bulk of the oil is quickly removed out of the air flow and to be drained back to the machine tool through the 4 inch intake (BV type) or the 1/2 inch oil pipe drain (BM type).
2. Centrifugal
In the intermediate blower, a vortex is created by the fan rotation causing a formation of large oil drops which will easily be separate on the side plenum. Because of the gravitation, the large oil drops will again flow back to the machine tool through (another) 1/2 inch oil pipe drain located at the bottom of the side plenum.
3.Final Filtration
The cleaned air is sucked by the blower and blown out through the "non-woven filter fabrics" towards the top of the unit.

BM type (Accessories) ● Stainless pleated filter cartridge ● Non-woven Filter Fabric (10 Pcs) ● Flanged External Connector (to be bolted to the machine enclosure) ● Strainer for the External Connector ● Transparent PVC hose ( I.D.:1/2 inch) ● 90 ºC Elbow (2 Pcs) ● Flexible Duct ● Duct Clamp (4 Pcs) ● Hardware
FILTRATION ELEMENT

● BM Type - Ducted Style Oil Mist Collectors  ● BV Type - Direct Mount Style Oil Mist Collectors
* Motor - TEFC,  IP54 Grade F Insulation
* Permitted maximum ambient temperature is 40ºC

SPECIFICATIONS 60Hz

60HZ PERFORMANCE CURVES

ALJ